Features and functions of the HDGY-TD rail clips 
 (1): HDGY-TD series is used for concrete crane beam orbit elasticity of fixed links. It has to reduce the wear of the track top; to reduce the impact of the crane on the crane girder; reduce crane rim wear and tear; to reduce the noise performance. 
 (2): a set of flexible composite rubber pad between the track and crane beams, not only increased the friction of the intervening, so that rail is not easy to traverse, and to eliminate or reduce the clearance of the track and crane beam along the track of the whole phenomenon of uneven length. Thereby improving the situation of the plate bolt force. 
 (3): the cross-section of the flexible composite rubber pad was the middle of convex shape, so that reasonable force. The small rectangular convex section of the plate above is easy to deformation, not only to make the pad and the track is easy to contact, but also increases the elasticity of the plate. Played a shock-absorbing role. 
 (4): a rectangular slot of the flexible composite rubber pad set in the direction of the cross-section of the plate direction, reducing the overall lateral deformation of the plate force, thereby reducing the rubber sheet surface damage caused as a result of compressional deformation. Treated with a plate, its structure is very reasonable. After 2 million fatigue performance test is still good performance. So, even after prolonged use, the plate will not be damaged. 
 (5): The plate is secured to the crane beam, not loose, easy to wear crane beam. Symmetrical set of plate to form a wedge-shaped structure in cross section, thus limiting the track about displacement. 
 (6): design of oval holes in the plate main body, so that the plate there is room for adjustment; with the slope of the hole and only retreat block tie fastening can effectively prevent the platen traverse displacement. Provide a convenient lateral adjustment for the installation or maintenance of the crane rail. 
 (7): allow trace swinging crane running track. 
 (8): applied to the track length welding.